Sunlight Supply Dominator XXXL 8″ Air-cooled Reflector

Sunlight Supply are probably the makers of the finest quality reflectors available today. The Magnum Dominator Reflector is no exception. It is a superbly made reflector that brings you quality without compromise, for when only the best will do.

  • Made with the finest quality materials
  • Superb construction
  • Highly reflective dimpled surface
  • One of the biggest reflectors on the market – especially for lighting large areas
  • Amazingly even light-spread over 1.5m square area, particularly with a 1000W HID lamp
  • Closed ends with 200mm flanges for even better reflectivity and even light-spread
  • Glass is included – requires only a 200mm extractor fan and ducting for air-cooling
  • Can be used with any HID lamp – perfect for use with a 1000W HID lamp
  • Perfect for use in a 1.5m square grow-te

1 x Sunlight Supply Magnum Dominator Air-cooled Reflector with 3 metre cable terminated in an IEE plug.

The Magnum Dominator Reflector is the choice for growers looking for the ultimate air-cooled reflector for a 1.5m square tent or similar sized grow-area. It has a 200mm (8 inch) flange at each end for the fitting of ducting. Also Allowing it to be connected to a duct fan to control temperatures in your grow area. It also has a highly reflective dimpled surface along with reflective closed-ends to reflect as much light as possible straight downwards towards your plants. The Magnum Dominator gives amazingly even light-spread in a 1.5m square grow-tent. Its manufactured with only the finest quality materials and the construction is second to none – everything is handcrafted in the USA. There simply isn’t a better engineered air-cooled reflector in its size range and class. Use it with any HID lamp up to an output of 1000 watts.

The Magnum Dominator Reflector

Is designed for use with any horizontally mounted HPS or MH lamp. Therefore Simply hang the reflector over the centre of the grow-space at an appropriate height using Rope Ratchet Hangers or jack chain. Holding your lamp with a clean cloth insert it into the E40 bulb-holder in the Magnum Dominator Reflector and screw it in very firmly. An extraction fan (200mm recommended) should be connected to one flange on the reflector via 200mm ducting. The other 200mm flange can be run to a fresh-air intake or hot-air exhaust via 200mm ducting. Plug the lead into an appropriate ballast for HPS/MH type bulbs or an IEE (kettle type) mains lead for fluorescent type bulbs and switch on. Please note that your extraction fan MUST be running while the lamp is being used.

Warning: When HID lamps are switched on they run extremely hot. As with all high pressure sodium and metal halide bulbs it is necessary to avoid touching the lamp with anything such as fingers or plants as this may cause severe burns or fires. In particular avoid sprays or liquids coming into contact with the lamp as this may cause premature failure or even an explosion.

Sunlight Supply Magnum Dominator dimensions: Length – 890mm, Width – 700mm, Depth – 250mm

Lamp sold separately.