Description

Autopot Yellow Silicon for Aquavalve

Autopot Yellow Silicon for Aquavalve. The AQUAvalve silicones are inserted into the recesses in the top & bottom floats of the AQUAvalve. There is only one size and they are produced in a bright yellow colour for easy visibility.

There are two of these small yellow seals in every AquaValve and So they often get lost.

The AQUAvalve is supplied with every AutoPot Watering System. Once connected to the water supply, the AQUAvalve will control the flow of water to the plants by simple gravity pressure from a reservoir or tank of any size. So no pumps, mains water pressure, electricity or timers are required.

Once connected to a reservoir the AQUA valve will open and allow water to fill the tray to a pre-set level of 20mm. The AQUA valve will not refill the tray until all the water has been used; this ensures that the plants are not constantly sat in water. Once all the water has been used by the plants the AQUA valve will re-open and refill the tray.

The AQUA valve is a simple and very effective watering device, so needs to be treated with care. Also keep the AQUA valve and the tray it sits in clean. Free of obstructions, soil particles and it will feed and water your plants for many years.

  • Automatic and extendable self-watering system
  • Operated by gravity pressure
  • Easy to use in all environmental conditions
  • Increase yields and reduce consumption of water
  • Most environmentally friendly watering systems in the world
  • No loss of water, run-off or leakage
  • Easy to extend and modify
  • No need of power, pump or timer to operate
  • Ideal for all type of gardeners, professional or not